Ubud: 2-Hour Make Your Own Silver Jewellery Class

Make silver jewelry in Ubud in two hours. At Krisna Yuna Gallery, you get hands on help from a silversmith, from melting silver to finishing your own piece you can actually wear. I also love the design catalog options, because you are not guessing your way through the whole workshop.

The one real consideration is the silver weight limit. You choose a package (commonly 5 g or 7 g), and if your piece goes over the included amount, you pay extra per gram.

Key highlights you will care about

• Real hands on metalwork like melting, hammering, forging, grinding, and polishing, with an expert watching your hands
• Lots of design options from a catalog book and a silver gallery with more than 1000 designs
• You pick what you make such as rings, earrings, pendants, bracelets, or even safety pins
• Small details matter because you can personalize patterns if there is time within the session
• Friendly, patient teaching with lots of step by step guidance, and guides who will help fix mistakes

Krisna Yuna Gallery in Ubud: the setup that makes this class easy

This class is based at Krisna Yuna Gallery in Ubud, located opposite the Bali Zoo parking area. For your arrival, that is helpful, because you can anchor yourself to a big, recognizable point. Parking is available on site, so you are not dealing with a puzzle at the last minute.

Inside, you are not treated like you are there for a quick photo op. The workshop is built around giving you tools, a workspace, and a silversmith who can guide you while you work. The gallery vibe matters too. You can browse design options without feeling rushed, and you can compare patterns in the catalog book before you commit.

I like that this is a simple, straightforward activity that fits well into an afternoon plan, including rain days. A number of people also describe the location as quiet, which is exactly what you want when you are focused on fine metalwork.

One more practical point: you will be working with your hands, so comfortable clothes are a must. Think sleeves you do not mind getting a little dusty, and shoes you can stand in.

What happens in your two hour silver jewellery session

The course runs about 1.5 to 3 hours depending on your flow, with a booking duration of two hours. Either way, plan around a focused block of time where you choose a design early and then get busy.

Here is the typical flow you should expect:

1) Materials and tools intro

You start with a walkthrough of the tools and materials. This is not heavy theory. It is the practical basics so you can safely handle the equipment and understand what each step is meant to do.

2) Pick your design from the catalog book

You browse designs you can see in the catalog book. For ring makers, the patterns are presented as options you can select from, and you can then make changes to your chosen design when you want a personal twist. There is also a silver gallery with more than 1000 designs, so you are not stuck with only a few ideas.

3) Decide your piece type and work within the silver weight

Depending on the package you choose, you get a set amount of silver (often framed as 5 g or 7 g). You can create items like earrings, a ring, or a pendant, and the workshop also mentions options such as bracelets and safety pins. Your silversmith helps steer you toward a design that can realistically be finished in the session and within your silver amount.

4) The hands on metalwork (the fun part)

This is where the class feels genuinely different from a typical souvenir stop. You get hands on time with steps such as:

• melting silver
• forging and hammering
• grinding and shaping
• brazing (joining work)
• filling your design with gems if you choose that option
• inscribing details (for the people who want something meaningful)
• polishing the final piece

And yes, the silversmith is there the whole time, so if something goes slightly off, they can correct course and keep your piece on track.

5) Take your finished jewellery home

You leave with a finished piece made with the silver you worked on. This is the key value point. It is not a class where you sit and watch while someone else does the hard work.

Design choices in the catalog: how personalization really works

A lot of workshops say you can customize. This one is better about it because they give you real patterns to start from. You are selecting from dozens of ring patterns and other catalog designs, which removes the stress of creating something from scratch.

From what you are likely to experience on site, personalization happens in two main ways:

• Switching or adjusting details within the chosen design pattern
• Adding your own spin if it fits the time you have and the silver weight you selected

Some people come in with a specific idea, like recreating a family ring or making a keepsake for a loved one. The staff can usually work with changes to the design, but you still want to be realistic. If you try to cram major changes into every step, the silversmith may have to guide you toward what can be completed well within the session.

Also, do not assume you can add unlimited extras. There are additional costs for gems or stones, and gold plated options cost extra too. If you want that look, treat it as a planned upgrade, not a last minute surprise.

One detail I really like: even if your focus is on your own piece, the staff may clean and polish silver jewellery you bring with you to match your new item. That small service can make the class feel like more than just one finished object.

Price and silver weight: where the real value and the real costs show up

The class price is $40 per person, and that is the headline number. The value, though, depends on how you manage the silver amount and any add ons.

Here is what the pricing information points to:

• You get a finished piece made with high quality silver, typically in the 3 to 7 gram range depending on the package.
• There is an additional fee for excess silver. One note says IDR 100,000 for excess silver depending on the package you choose (5 g or 7 g). Another note says IDR 75,000 per gram if your jewellery exceeds the weight included, and it also mentions IDR 75,000 per gram if you go over 7 grams total.
• If your finished piece is below the package weight, the price still follows the package you selected.

So the budgeting tip is simple: pick a design that looks great without requiring you to push the maximum silver. If you are trying to create something thick and heavy, you may end up paying extra.

There are also additional charges for:

• adding gems or stones
• a gold plated option

One more important limit: it is not possible to share silver with another person. If you are coming as a couple, you will each need to manage your own silver plan.

This is still a strong value for Bali because you are paying for time with a silversmith, tools and materials, and a finished piece you make yourself. Just make sure you treat the silver weight as the budget guardrail that keeps the cost predictable.

Language and teaching style: English can vary, but the process is still clear

The instructor speaks English, Indonesian, and Malay. That helps, especially if your English is a bit rusty or you want to confirm something fast.

One review note you should plan for: some people found the English not particularly strong, so you may need to pay close attention to what the silversmith is saying. On the flip side, other people reported guides with clear English, and they made the steps easy to follow.

The best way to reduce any language frustration is also the simplest: watch closely, then ask for help right away if you are unsure. The workshop is described as patient, and guides are willing to step in when you are struggling or when you want a small correction.

Another teaching detail that comes up: the staff will get you involved in each stage rather than letting you do only one step. You should expect to work through multiple processes, even if it is supervised.

What it is like to leave with a piece you made yourself

The emotional payoff here is real. You are not buying a bracelet and calling it cultural. You are leaving with something you formed, shaped, and polished. That is why this activity works so well as a Ubud memory.

What you can do with the end result:

• wear your ring or pendant right away
• gift it, especially if you personalize the design
• keep it as a travel keepsake that actually has a story attached

Many people highlight the quality of the finished piece, including a shiny polished look. And if you already own other silver jewellery, the staff may polish it so everything matches.

There is also a practical bonus: the workshop takes photos and videos. If you care about documenting a hands on day, this is one of the few Bali activities where the photos actually show you doing something, not just standing near something.

Who should book this Ubud silver jewellery class, and who should skip it

This class is a great fit if:

• you like hands on activities and want a break from temples and beaches
• you want a personalized souvenir that is genuinely made by you
• you are traveling as a couple, as a solo traveler, or as a small group and you want something different
• you are okay paying attention during metalwork steps, because the process matters

It is less ideal if:

• you hate crafts or you want a purely passive experience
• you are traveling with young kids, because the class is not suitable for children under 7 years
• you want to create a very complex, heavy piece without thinking about silver weight, since excess silver fees can apply

If you are deciding between a shopping stop and a workshop, this is the type of activity that feels like it belongs on your Ubud itinerary, especially if you want something memorable that does not disappear the minute you get home.

Should you book this Ubud silver jewellery class?

I think you should book it if you want a real skill-based souvenir, with expert help and a clear path from design selection to finished jewellery. For the money, the value comes from the combination of materials, tools, step by step guidance, and the fact that you leave with something you truly made.

Book with a little budgeting discipline too. Choose a design that fits the silver amount in your package, and decide ahead of time if you want gems or gold plating, since those are extra costs. If you do that, you will likely end up with a beautiful piece and a story you can wear.

FAQ

How long is the Ubud silver jewellery class?

The course is listed as 1.5 to 3 hours, and the booking duration is two hours. Check available starting times when you book.

What can I make during the class?

You can work on silver jewellery such as rings, pendants, earrings, bracelets, or safety pins. The class also mentions creating a pair of earrings, ring, or pendant using the included silver weight.

How much silver is included in the price?

The included silver jewellery uses high quality silver, and it is described as 3 to 7 grams depending on the package you choose (with packages commonly referenced as 5 g or 7 g).

What if my jewellery uses more silver than the package includes?

If your piece exceeds the weight included in your package, there is an additional fee. The details provided mention IDR 75,000 per gram for excess silver, and also an IDR 100,000 fee for excess silver depending on the package you choose.

Are gems and gold plating included?

No. There is an additional charge for adding gems or stones, and there is also an additional charge for the gold plated option.

Do I need any prior experience to take the class?

No prior experience is required. The class is suitable for participants of all skill levels.

Where is the meeting point in Ubud?

The class is held at Krisna Yuna Gallery, located opposite the Bali Zoo parking area.

What languages does the instructor speak?

The instructor speaks English, Indonesian, and Malay.

Is the class suitable for children?

No. The activity is not suitable for children under 7 years.